Up & Over Ledger Rig !!!!

[Joe Bolwell]

Up & Over Ledger Rig
An up & over running ledger rig with a fine, long flowing hook length. The power from the cast stops at the main line swivel and with the use of the SRT Clip, the stress on the hook length during the cast is sompensated for, making this rig suitable for distance casting.



To Make this Rig
For the rig body, you will need;
1 x Genie Link Clip
2 x Genie mini-Crimp
2 x Genie 3mm Beads
1 x SRT Pulley Clip
1 x SRT Spring
1 x ABC Link Clip
1 x Genie 4mm Power Beads
1 x Genie 80lb Main Line Swivel
1 x approx. 1130mm length 60lb main line (for 830mm body)

You will also need;
1 x 1230mm snood


The Rig Body

1. Tie on the 80lb main line swivel and thread on the rest of the components in this order.

4mm power bead 3mm bead
ABC Link Clip SRT Clip
red slider 3mm bead
crimp crimp
SRT Spring

2. Tie on the top Genie Link Clip

3. Hang the rig from a peg by the top Genie Link Clip and attach a sinker onto the free running Genie ABC Link Clip.

4. Locate the ABC bait clip in the slider ans attach the snood to the main line swivel.

5. Locate the hook in the bait clip and lay the snood line through the pulley clip.

6.Hold the sinker down firmly and, with a pair of pliers, push the crimp that is under the spring assembly up the main line until the spring is 2/3 compressed and secure it.

7. Release the hook, and with the crimp above the assembly, compress until the spring is 3/4 of its original length and secure.

Your rig is ready!

pic to be added

Joe